Mechanical Products
Results Found: 22

CAD_Mech_Off

B303: Grooved End Butterfly Valves

The GRINNELL Model B303 Butterfly Valves provide for efficient control in piping systems of on/off or throttling/balancing service, fluid flow, and bubble-tight shut-off. The valves are furnished with grooved ends for use with grooved couplings and can be easily adapted to flanged components utilizing GRINNELL Figure 71 and Figure 71H Class 150 Flange Adapters.

Data Sheet: G315

CV-1: Grooved End Check Valves

The GRINNELL Model CV-1 Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction. They are manufactured with a ductile iron body and a nickel-plated seat.

Data Sheet: G352

760P: GRINNELL Mechanical Products Figure 760P "Y" Strainer

The Figure 760P "Y" Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps and similar equipment, from debris and foreign matter. This Strainer features a 304 Stainless Steel screen that is secured with an end cap and a mechanical coupling. Cleaning and maintenance of the screen can be accomplished easily by removing the coupling. The Figure 760P Strainer is suitible for vertical and horizontal installation.

Data Sheet: G422

CB800: Circuit Balancing Valves BSP Threaded Ends

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining and filling. The GRINNELL Thread-by-Thread Model CB800 Valve, available in sizes 15 to 50mm ( 1/2" to 2"), is composed of zinc retaining brass.

Data Sheet: G450 Install Sheet: G988

CB800: Circuit Balancing Valves Grooved Ends

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. The GRINNELL Groove-by-Groove Model CB800 Valve, available sizes 65 to 300mm (2 1/2" to 12"), is composed of cast iron.

Data Sheet: G450 Install Sheet: G988

CB800: Circuit Balancing Valves Flanged Ends, PN16/PN10

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model CB800 Valve, available in sizes 65 to 300mm (2 1/2" to 12"), is composed of cast iron.

Data Sheet: G450 Install Sheet: G988

CB800: Circuit Balancing Valves Flanged Ends, ANSI Class 125#

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model CB800 Valve, available in sizes 65 to 300mm (2 1/2" to 12"), is composed of cast iron.

Data Sheet: G450 Install Sheet: G988

CB800: Circuit Balancing Valves Solder Ends

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining and filling. The GRINNELL Solder-by-Solder Model CB800 Valve, available in sizes 15 to 50mm ( 1/2" to 2"), is composed of zinc retaining brass

Data Sheet: G450 Install Sheet: G988

CB800: Insulation Kits for Circuit Balancing Valve

The insulation shells have a CFC-free inner core made of polyurethane foam with a 1.5mm (0.06") plastic coat. It consists of two double shells which are tightened by two metal straps.
Available for sizes 15 - 200mm ( 1/2" - 8"). Specify size and end-connection type.


Data Sheet: G450

CB800: MC2 Measuring Computer for Circuit Balancing Valve

The GRINNELL Model MC2 computer is a hand-held computer-balancing instrument designed to measure the flow in GRINNELL Balancing Valves from 15 - 300mm ( 1/2" - 12").

Data Sheet: G450

70607: Groove Ended Metering Station

Oventrop groove ended metering station PN16 complete with 2 extended pressure test points.
Oventrop groove ended metering stations are installed in the pipework of hot water heating and chilled water systems to obtain flow measurements.


Venturi: Flow Meter Butt Weld with Grooved Ends



RXAG: Expansion Joint



ALG: Expansion Joint



ANS: Expansion Joint



FTU: Rubber Bellows ISO R7 Threaded



FSF: Flanged Rubber Bellows



UFBX: Flexible Hoses

The hoses are annularly corrugated formed from butt weld rigid tube. Depending on the application, required working pressure and conditions of operation, a single or double layer of wire braid is applied externally to the hose to restrain it, increasing its ability to withstand the pressure, increasing hoop strength and protection from abrasion. The extent of braiding, gauge and angle of lay is calculated carefully to maximize performance.

HERCULES: Fix Point



FAZ II: Anchor

Anchor bolt for push-through installation.

407GT: Clearflow Dielectric Waterway Groove X Thread

Clearflow Fittings protect plumbing systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The dielectric fittings separate dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell.

407T: Clearflow Dielectric Waterway Male Thread X Male Thread

Clearflow Fittings protect plumbing systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The dielectric fittings separate dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell.