Fire Products
Results Found: 8

CAD_Mech_Off

JPL 39109S: Butterfly Valves



JPL 39109A: Butterfly Valves APSAD Approved



BFV-N: G-FIRE Butterfly Valves Groove x Groove

The Model BFV-N Grooved End Butterfly Valves are indicating type valves designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed. They are used, for example, as system, sectional, and pump water control valves. They have cut groove inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems.

Data Sheet: TFP1510

TMRT: Resilient-Seated Gate Valves Outside Screw & Yoke Flange x Groove, PN16

Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation. End connection configurations including Flange by Groove, and Groove by Groove are available.
Valve components are either inherently corrosion-resistant or protected with fusion-bonded epoxy resin coating for a long, reliable service life and enhanced UV protection in exposed installations. This valve is one of the lightest, most durable gate valves on the market today. Its design features and material selection criteria fulfill the need for a reliable, long life and easy to operate gate valve.


Data Sheet: TFP1545

TMRG: Resilient-Seated Gate Valves Outside Screw & Yoke Groove x Groove

Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation. End connection configurations including Flange by Groove, and Groove by Groove are available.
Valve components are either inherently corrosion-resistant or protected with fusion-bonded epoxy resin coating for a long, reliable service life and enhanced UV protection in exposed installations. This valve is one of the lightest, most durable gate valves on the market today. Its design features and material selection criteria fulfill the need for a reliable, long life and easy to operate gate valve.


Data Sheet: TFP1545

TMPT-P: Resilient-Seated Gate Valves Flange x Groove ANSI Class #150 & PN16

Resilient-Seated Gate Valves with Vertical and Cross Wall Indicators are used in fire protection systems for on/off operation. End connection configurations including Flange by Groove, and Groove by Groove are available.
The fully encapsulated EPDM ductile iron wedge ensures drop-tight sealing.
Valve components are either inherently corrosion-resistant or protected with fusion-bonded epoxy resin coating for a long, reliable service life and enhanced UV protection in exposed installations.


Data Sheet: TFP1540

TMPG-P: Resilient-Seated Gate Valves Groove x Groove

Resilient-Seated Gate Valves with Vertical and Cross Wall Indicators are used in fire protection systems for on/off operation. End connection configurations including Flange by Groove, and Groove by Groove are available.
The fully encapsulated EPDM ductile iron wedge ensures drop-tight sealing.
Valve components are either inherently corrosion-resistant or protected with fusion-bonded epoxy resin coating for a long, reliable service life and enhanced UV protection in exposed installations.


Data Sheet: TFP1540

CV-1: G-FIRE Grooved Check Valves

The Model CV-1 Check Valve is a compact and rugged swing-type unit that allows water flow in one direction and prevents flow in the opposite direction. A resilient elastomer seal facing on the spring-loaded clapper ensures a leak-tight seal and non-sticking operation. The Model CV-1 Check Valves are designed to minimize water hammer caused by flow reversal.

Data Sheet: TFP1550 Install Sheet: TFP1555


Copyright © 2014 Tyco Fire Products, LP. All Rights Reserved   Toll Free: 800-558-5236 | Tel: +1-401-781-8220 | Privacy Policy | Terms of Sale | Careers Tyco Mechanical Products