Page 355 - Mechanical Products Installation Handbook IH-1000M
P. 355
Gasket Recommendations For Air, Water, and Chemical Use
(10 of 10)
GASKETS 347
Chemical Composition
Gasket Grade
Water, to 250°F (121°C)
EHT
Water, Acid Mine E/T
Water, Chlorinated, to 3500 ppm E
Water, Deionized E
Water, Seawater E
White Liquor E
Xylene O
Zinc Nitrate E
Water, Bromine
O
Water, Chlorine
E
Water, Potable
EN/EHT
Water, Waste
E/T
Wood Oil
T
Zinc Chloride, to 50%
E
Zinc Sulfate
E/T
Notes:
• Specify gasket grade when ordering.
• For vacuum or low-temperature systems, use Tri-Seal Gaskets. Use a petroleum-free silicone
lubricant.
• Check gasket color code to ensure it is recommended for the intended service.
• Unless otherwise specified, note all gasket listings are based upon a temperature of 70°F (21°C).
• Where more than one gasket is shown, the preferred gasket grade is listed first.
• For services not listed, contact GRINNELL Mechanical Products for recommendations.
• Refer to Technical Data Sheet G610 Gaskets.
