Page 33 - Mechanical Products Installation Handbook IH-1000M
P. 33
INSTALLATION INSTRUCTIONS 25 Couplings
Transition Coupling
Step 5. Insert the bolts into the coupling and rotate the nuts until finger tight. Verify that the bolt heads are fully recessed in the housing.
Alternate when tightening nuts until properly tightened to bring housing in contact with the bolt pads.
Note: Always tighten the nut and bolt set evenly. Uneven tightening can cause the gasket to pinch or bind.
When setting the torque on power impact wrenches, always refer to the manufacturer's recommended bolt torque specifications. Failure to use the manufacturer's settings and abide by manufacturer instructions may result in loss of warranty protection, invalidate listing certifications and/or cause personal injury or property damage.
Step 5.
Step 6.
