Page 74 - GRINNELL Mechanical Grooved Piping Products EMEA

Grooved Couplings
Outlet Fittings
Figure 730
Mechanical Tees – Grooved Tech Data Sheet: G210
(Page 3 of 3)
C
D
Hole Dia.†
Max.‡ End Load Branch kN Lbs.
Dimensions - mm In.
Bolt Size mm In.
Approx. Weight kg Lbs.
Part Number
Nominal Size Run x Branch DN
In.
Min. mm In.
Max. mm In.
A
B
C
D
730AG8025✖ 730ag8026✖ 730ag8030✖ 730ag8042✖
8 x 2- 1⁄2 8 x 76.1mm 8 x 3
8 x 4
B
A Hole
Dia.
Figure 730 Branch Outlet with Grooved Branch (Tee Configuration)
2.75 2.88 2.75 2.88 3.50 3.63 4.50 4.63
3⁄4 x 4-3⁄4 12.3
200 x 65
69.9
73.0
14.4
3245.9 6.25 3534.3 6.25 4810.6 6.50 7952.2 6.38
12.50 4.38 4.90
12.50 4.38 4.90 – 12.3
158.8
317.5
111.3
124.5
M20 x 121
5.6
200 x 65
69.9
73.0
15.7
158.8
317.5
111.3
124.5
M20 x 121
5.6
200 x 80
88.9
92.1
21.4
165.1
317.5
130.3
124.5
M20 x 121
6.0
✖ = 1 for red paint finish, 2 for hot dipped galvanised finish
 Contact a GRINNELL Sales Representative for dimension details.
† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 15.9mm ( 5⁄8") of the hole to ensure it is
free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might affect assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides of the pipe.
‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 66 for mechanical tee specifications, and see pages 116 - 127 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 13 or contact a GRINNELL Sales Representative.
74
12.50 5.13 4.90 12.50 6.13 4.90
3⁄4 x 4-3⁄4 13.2 3⁄4 x 4-3⁄4 14.7
200 x 100
114.3
117.5
35.4
162.1
317.5
155.7
124.5
M20 x 121
6.7