Page 71 - GRINNELL Mechanical Grooved Piping Products EMEA

Outlet Fittings
Figure 730
Mechanical Tees – Threaded Tech Data Sheet: G210
B C
Hole A Dia. E
(Page 3 of 3)
D Takeout
Figure 730 Branch Outlet with Female BSP Threaded Branch
(Tee Configuration)
Nominal Size Run x Branch DN
In.
Hole Dia.†
Max.‡ Branch End Load kN Lbs.
Dimensions - mm In.
Bolt Size mm In.
Approx. Weight kg Lbs.
Part Number
Min. mm In.
Max. mm In.
A
B
C
D
E
730at6226✖ 730at6230✖ 730mt6312✖ 730at6315✖ 730at6320✖ 730at6326✖ 730at6330✖ 730at8020✖ 730at8026✖ 730at8030✖
165.1mm x 76.1mm 165.1mm x 3
6 x 1-1⁄4
6 x 1-1⁄2
6 x2
6 x 76.1mm
6 x3
8 x2
8 x 76.1mm
8 x3
2.75 2.88 3.50 3.63 2.00 2.13 2.00 2.13 2.50 2.63 2.75 2.88 3.50 3.63 2.50 2.63 2.75 2.88 3.50 3.63
3584.3 5.13 4810.6 5.50 1082.1 5.13 1417.6 5.13 2215.1 5.13 3245.9 5.13 4810.6 5.50 3245.9 6.25 3534.3 6.25 4810.6 6.50
9.25 4.38 9.25 5.13 9.25 3.56 9.25 3.56 9.25 4.06 9.25 4.38 9.25 5.13 12.50 4.06 12.50 4.38 12.50 5.13
4.18 3.90 4.37 3.90 4.25 3.90 4.04 3.90 4.31 3.90 4.18 3.90 4.37 3.90 5.12 4.90 5.12 4.90 5.37 4.90
– 9.0
– 10.5 5⁄8 x 4-3⁄4 7.5 5⁄8 x 4-3⁄4 7.5 5⁄8 x 4-3⁄4 7.7 5⁄8 x 4-3⁄4 8.9 5⁄8 x 4-3⁄4 10.3 3⁄4 x 4-3⁄4 12.1
– 12.6 3⁄4 x 4-3⁄4 13.6
150 x 65
69.9
73.0
15.7
130.3
235.0
111.3
106.2
99.1
M16 x 121
4.1
150 x 80
88.9
92.1
21.4
139.7
235.0
130.3
111.0
99.1
M16 x 121
4.8
150 x 32
50.8
54.0
4.8
130.3
235.0
90.4
108.0
99.1
M16 x 121
3.4
150 x 40
50.8
54.0
6.3
130.3
235.0
90.4
102.6
99.1
M16 x 121
3.4
150 x 50
63.5
66.7
9.9
130.3
235.0
103.1
109.5
99.1
M16 x 121
3.5
150 x 65
69.9
73.0
14.4
130.3
235.0
111.3
106.2
99.1
M16 x 121
4.0
150 x 80
88.9
92.1
21.4
139.7
235.0
130.3
111.0
99.1
M16 x 121
4.7
200 x 50
63.5
66.7
14.4
158.8
317.5
103.1
130.0
124.5
M20 x 121
5.5
200 x 65
69.9
73.0
15.7
158.8
317.5
111.3
130.0
124.5
M20 x 121
5.7
200 x 80
88.9
92.1
21.4
165.1
317.5
130.3
136.4
124.5
M20 x 121
6.1
✖ = 1 for red paint finish, 2 for hot dipped galvanised finish
† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 15.9mm ( 5⁄8") of the hole to ensure it is
free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might affect assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides of the pipe. The use of threaded products other than steel pipe, such as dry pendent sprinklers, may not be compatible with the female threaded outlet on the Mechanical Tee. Always confirm compatibility by contacting a GRINNELL Sales Representative.
‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.
Threads are BSP. Some size outlets are available with NPT threads. Contact a GRINNELL Sales Representative for details.
For information on alternative sizes, contact a GRINNELL Sales Representative.
See page 66 for mechanical tee specifications, and see pages 116 - 127 for gasket information.
For instructions on part numbers, ordering information, and availability, refer to page 13 or contact a GRINNELL Sales Representative.
71