Page 32 - GRINNELL Mechanical Products Catalogue

GROOvED COupLiNGS
Figure 71 Flange Adapters (AS2129 Table E)
Tech Data Sheet: G150
3 3.500 2,886 7.88 6.30 0.94
4 4.500 4,771 9.00 7.09 0.94
6 6.625 10,341 11.25 9.45 1.00
8 8.625 27,229 13.38 11.61 1.13
For additional listings or approvals, see page 11 or visit our website at www.grinnell.com
AC
F BED
Sizes 50mm - 300mm (2" - 12")
O.D. mm Inches
Max † End Load Lbs. N
Dimensions - mm Inches
Recommended Flange Mating Bolts ‡
Size Dia. x Lg mm Inches
Qty.
Bolt Torque Range Nm
Nominal mm Inches
A
B
C
*D
*E
F
80
88.9
12,838
200.2
160.0
23.9
88.9
115.1
3.50 4.53 8.75
4.50 5.53 9.90
6.50 7.53 12.12
8.62 9.94 14.31
8 6.4 8 7.7 8 10.6 12 15.0
222.3
M16 x 76
149-190
2.9
100
114.3
21,222
228.6
180.1
23.9
114.3
140.5
251.5
M16 x 76
149-190
3.5
150
168.3
45,999
285.8
240.0
25.4
165.1
191.3
307.8
M20 x 89
298-339
4.8
200
219.1
121,121
339.9
294.9
28.7
218.9
252.5
363.5
M20 x 89
298-339
6.8
32
www.grinnell.com
Pipe Size
* Dimensions D and E represent minimum and maximum sealing surfaces.
† Maximum end load is total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe
materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Mating Bolts and Nuts are not supplied. Flange Mating Bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard;
responsibility lies with the purchaser to verify the correct length for the intended application. Maximum Pressure rating is 2,068 kPa (300 psi).
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for general notes, and see pages 140 - 146 for gasket information.
See page 165 for flange washer adapter and page 166 flange drilling specifications
Approx. Wt. Lbs kg
Grooved CouplinGs