Other GRINNELL Regions  |  Contact Us  |  Login
GRINNELL Middle East

Mechanical Products
Results Found: 13

CAD_Mech_Off

672: Rigid Couplings

The GRINNELL Figure 672 Rigid Coupling provides a rigid joint that firmly grips the entire circumference of the tube. This coupling is a proven, dependable method of joining copper tube and an economical alternative to soldering (sweating) joints.

Data Sheet: G510 Submittal Sheet Install Sheet: G960

640: Pivot-Bolt Rigid Coupling

The GRINNELL Figure 640 Pivot-Bolt Rigid Coupling joins rolled grooved, hard-drawn copper tubing systems (CTS). It provides a rigid joint by firmly gripping the entire circumference of the copper tube groove.
The Figure 640 Pivot-Bolt Rigid Coupling is capable of pressures up to 300 psi (20,7 bar).


Data Sheet: G512 Submittal Sheet Install Sheet: G904

61: Flange Adapter

The GRINNELL Figure 61 Flange Adapter provides a direct transition from flanged components to GRINNELL grooved copper components. Flange bolt patterns conform to ANSI Class 125 and 150 standards.

Data Sheet: G515 Submittal Sheet Install Sheet: G970

610: Grooved 90° Elbow

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

601: Grooved 45° Elbow

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

619: Tees

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

660: Caps

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

650: Concentric Reducer Grooved

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

652: Grooved Reducer Grooved X Cup

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

621: Reducing Tee Grooved x Grooved x Grooved

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

618: Reducing Tee, Grooved x Grooved x Cup

The GRINNELL Copper Grooved Fittings provide an economical and efficient method of changing direction in copper piping systems. The copper fittings are available in sizes 2 to 8 inch (DN50 to DN200) and are ready to be installed using the GRINNELL Figure 672 Rigid Coupling or the Figure 61 Flange Adapter for Copper Systems.

Data Sheet: G520 Submittal Sheet

B680: Copper System Butterfly Valve Grooved, EPDM

The GRINNELL Model B680 Butterfly Valve is for use with grooved copper tube (CTS) piping systems. It provides for efficient control of fluid in piping systems and has a 10 position locking lever handle. Flow may come from either direction, and the valve may be positioned in any orientation. The B680 features a bronze body and a disc that is fully encapsulated with EPDM rubber for potable water service.

Data Sheet: G530 Submittal Sheet

Tools: Groover Mini-Mite 2" - 8" Copper Tube, Model #1039-66, Ratchet Hand Crank or Chucked into a Rigid 300

Mini-Mite roll groovers allow you to handle anything when you get on the job site. They are handy, portable jobsite\ntools that can save you hours of waiting for pipe to come back from the shop. New design has roller\nbearing front and back on main shaft.

Data Sheet: G720 Submittal Sheet


Copyright © 2014 Tyco Fire Products, LP. All Rights Reserved   Toll Free: 800-558-5236 | Tel: +1-401-781-8220 | Privacy Policy | Terms of Sale | Careers Tyco Mechanical Products