Other GRINNELL Regions  |  Contact Us  |  Login
GRINNELL Middle East

Mechanical Products
Results Found: 7

CAD_Mech_Off

S853: "Y" Strainer Grooved

The GRINNELL Figure S853 "Y" Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps, and similar equipment. The inlet and outlet ends are suitable for installation with Figure 705, 707, and 772 couplings. The Figure S853 "Y" Strainer has a standard screen, which is perforated 304 Stainless Steel.

Data Sheet: G420 Submittal Sheet

S855: Tee Strainer Grooved

The GRINNELL Figure S855 Tee Strainer is designed to remove particles from pipelines where a compact, accessible strainer is needed to protect pumps, meters, valves, and similar mechanical equipment. The inlet and outlet ends are suitable for installation with Figure 705, 707, and 772 couplings that provide quick and easy installation.

Data Sheet: G430 Submittal Sheet

S810: Suction Diffuser Groove x Flange

The GRINNELL Figure S810 Suction Diffuser removes foreign particles and provides proper flow conditions to the pump. It is compact and rugged for direct mounting to the suction side of a pump in either a horizontal or vertical position. Where space is limited, the Figure S810 Suction Diffuser can be used to replace straight pipe normally required to reduce turbulence. This Suction Diffuser can be used for primary or additional strainer protection, especially for controls, meters, and other rotating equipment.

Data Sheet: G410 Submittal Sheet

7550: Grooved Expansion Joints

GRINNELL Grooved Expansion Joints are custom-designed, thermal movement solutions that utilize the proven design characteristics of GRINNELL Flexible Couplings. Expansion joints are designed to be used in both hot and cold applications. When pipe heats up, the expansion joint contracts to absorb the thermal expansion of the pipe. When pipe cools down, the expansion joint expands to absorb the thermal contraction of the pipe.

Data Sheet: G460 Submittal Sheet

407GG: Dielectric Waterway Transition Fitting, Grooved x Grooved

The GRINNELL Figure 407GG Transition Fitting protects systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The transition fitting separates the dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell. The Figure 407GG Transition Fitting allows the connection between steel (IPS) size pipe and copper tube (CTS) size.

Data Sheet: G465 Submittal Sheet

407GT: Clearflow Dielectric Waterway Groove X Thread

The GRINNELL Figure 407GT Transition Fitting protects systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The transition fitting separates the dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell. The Figure 407GT Transition Fitting allows the connection between steel (IPS) size pipe and copper tube (CTS) size.

Data Sheet: G465 Submittal Sheet

407T: Clearflow Dielectric Waterway Male Thread X Male Thread

The GRINNELL Figure 407T Transition Fitting protects systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The transition fitting separates the dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell. The Figure 407T Transition Fitting allows the connection between steel (IPS) size pipe and copper tube (CTS) size.

Data Sheet: G465 Submittal Sheet


Copyright © 2014 Tyco Fire Products, LP. All Rights Reserved   Toll Free: 800-558-5236 | Tel: +1-401-781-8220 | Privacy Policy | Terms of Sale | Careers Tyco Mechanical Products